1. Keeping pressure or emergency power source Hydraulic Lift Table Actuator does not operate for a long time, and need to maintain a constant pressure, the accumulator can be used to compensate for leakage, so that the pressure is constant. ...detail>>
Electric hoist is a very wide used light and small lifting equipment, small size, light weight, large carrying capacity, often installed in electric single girder overhead cranes, gantry cranes and hanging cranes for lifting and moving objec ...detail>>
The main difference between Electric Winch and Wire Rope Electric Hoist: (except appearance) 1. Traveling method: electric hoist can move right and lift, electric winch can only be fixed. 2. Lifting speed: the general wire rope electric ho ...detail>>
* Loading capacity: 0.5 ~ 50t * Lifting height: 3 ~ 130m * Lifting speed: 6.6 m/min (single speed and dual speed) * Power supply: 110 ~ 660V,50/60Hz,3Phase * Controller voltage standard 24V. ...detail>>
Wire Rope Electric Hoist is a kind of small-lifting equipment, it can be mounted on single beam overhead crane, gantry cranes, jib crane, I-beam. Electric hoist as only one normal speed which can satisfy normal application. It is widely used ...detail>>
Lifting height: Wire rope electric hoist is a lifting tool, have a strict lifting height requirements, should choose lifting height according to your plant space, conventional lifting height is 6, 9, 12, 18, 24, 30 m, can be customized if sp ...detail>>
June, 23, 2017, four units of electric winches deliver to Singapore. The electric winches are mainly used for materials lifting and traction the weight drops during construction. It also used for crane as main hoists; ...detail>>
Capacity: 0.25 ~ 5 ton Maximum span: 6 m Lifting speed: 8/0.8 m/minute Electric hoist traveling speed: 20 m/minute Crane traveling speed: 20 m/minute This Jib Crane is a wall mounted swing jib crane, easy to install and control, wide ...detail>>
1. Column Mounted Jib Crane diagonal check error shoule be less than 5mm. 2. The relative error of Column Mounted Jib Crane span should be less than 3mm. 3. The crown of Column Mounted Jib Crane should be between 0.9 and 1.4 L / 1000. ...detail>>
Model NO.: KPX Wheel: Steel Wheel Weight: 1t - 200t Motor: DC Motor OEM: Accept Specification: CE ISO CHAS CCC Material: Q235B Steel Frame Controls: Button or Remote Controls Structure: Steel Box Structure ...detail>>
Electric wire rope hoist is the industrial lifting equipment, can be used alone, and also can be installed on overhead cranes, gantry cranes and other lifting equipment to load, unload and move material in workshops, warehouse, factory, cons ...detail>>
Wire rope electric hoist is a lifting equipment which widely used and necessary in Industry, it can be installed on single girder overhead crane, single girder gantry crane, jib crane and I-beam. ...detail>>
1. Power system: battery DC power supply, single-phase or three-phase power supply, diesel engine, hydraulic pump. 2. Traveling Mechanism: auxiliary self-propelled, two-wheel traction, self-driving type, and car modification. 3. Support le ...detail>>
Column Mounted Jib Crane can be used in factory building, Economical and beneficial, simple structure, can choose the crane weight from 0.25 to 20 tons. Column Mounted Jib Crane Other Character * Can use ground or remote control, pende ...detail>>
1. Check the wear pattern of roller, middle shaft and bearings, cylinder pin and bearing, boom hinge shaft and bearing. 2. Hydraulic lift table each parts should be added some lubricants to extend the bearing life. 3. Hydraulic oil quality ...detail>>